HOME     ABOUT US    CONTACT US     POOL ROOMS      POOL COVERS     WINTER COVERS

A-1 Midwest Enterprises

INSTALLATION OF FOAM CLIMBING RINGS

  1. Turn the unit upside down.
  2. Remove the large rubber drive tracks by pushing them off with one hand while turning the wheel tube with the other hand.
  3. Remove the wheel tubes.
  4. Soak the foam rings in water until the become soft. Position the rings at the ends of the rubber brushes. You should install two (2) rings per brush.
  5. Reinstall the wheel tubes and replace the drive tracks.


A-1 Midwest Enterprises, Inc.
7648 Sexauer Cr., Belvidere, IL 61008
ph: 800-308-3720
fax: 815-544-5498

2008 A-1 Midwest Enterprises, Inc.